Batch Number: FRAMECPSR
Product Name: Sodium hydroxide
Product Number: 5060233389728
Supplier: Naturallythinking, The Tramsheds, Coomber Way, Croydon, Surrey, CR0 4TQ
Contact Telephone: 020 8689 6489
Contact Email: email@example.com
Causes severe burns.
Classification: C: R35
Inci: Sodium hydroxide
Inhalation: remove victim immediately from source of exposure. Keep the affected person warm and at rest. Get prompt medical attention. Skin contact: Remove affect person from source of contamination. Remove contaminated clothing. Wash the skin immediately with soap and water. Get medical attention if any discomfort continues. Continue to rinse for at least 15 minutes.
Ingestion: NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS. Rinse mouth thoroughly. Get medical attention immediately. Drink plenty of water.
Eye contact: Remove victim immediately from source of exposure. Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Get medical attention immediately. Continue to rinse.
Extinguishing media: This product is not flammable. Extinguish with foam, carbon dioxide or dry powder. Special hazards: carbon monoxide (CO). Carbon dioxide (CO2). Protective measures in fire: self contained breathing apparatus and full protective clothing must be worn in case of fire.
Personal precautions: wear protective clothing for hands and eyes safety gloves and eye goggles. Environment precautions: do not allow ANY environmental contamination.
Cleaning up methods: DO NOT TOUCH SPILLED MATERIAL. Stop leak if possible without risk. Collect spillage in containers, seal securely and deliver for disposal according to local regulations. Flush contaminated area with
plenty of water. Do not contaminate water sources or sewer. Inform authorities if large amounts are involved.
Usage precautions: avoid inhalation of dust and contact with skin and eyes. Storage: store in tightly closed original container in a dry, cool and well ventilated place. Keep original container. Store away from acids. Unsuitable
containers - copper, zinc, aluminium, copper alloy, zinc alloy, aluminium alloy. Storage class: corrosive storage.
Respiratory protection: if ventilation is insufficient, suitable respiratory protection must be provided. Hand protection: use suitable gloves if risk of skin contact. PVC or rubber gloves are recommended. Eye protection: use approved safety goggles. Wear tight fitting goggles or face shield. Other protection: wear appropriate clothing to prevent any possibility of skin contact. Hygiene measures: DO NOT SMOKE IN WORK AREA. Wash promptly if skin becomes wet or contaminated.
Colour: White/off white.
Solubility: soluble in water.
Flammability: not flammable.
Mol weight: 40
Boiling point (deg C) 1390
Melting point (deg C) 318
Bulk density: 1.175g/ml
Relative density: 2.13
Stability: stable under normal temperature conditions.
Condition to avoid: reacts strongly with concentrated acids and chloro- hydrocarbons. Reacts strongly with water.
Materials to avoid: strong acid. Strong oxidising substances. Strong oxides. Chemically active metals.
Hazardous decomposition products: fire or high temperatures may form toxic and corrosive vapours.
Inhalation: dust is severely irritating to the upper respiratory system. Dust irritates the respiratory system and may cause coughing and difficulties in breathing.
Ingestion: may cause burns in mucous membranes, throat, oesophagus and stomach. Causes burns.
Skin contact: may cause severe chemical burns of the skin. Corrosive. Prolonged contact causes serious tissue damage.
Eye contact: causes burns. Risk or corneal damage. Visual disturbances including blurred vision.
Ecotoxicity: the product may affect the acidity (pH factor) in water with the risk of harmful effect to aquatic organisms. Mobility: the product is soluble in water.
Bioaccumulation: the product is not bioaccumulating Degradability: the product is easily biodegradable
General information: do not puncture or incinerate even when empty. Disposal methods: dispose of waste and residues in accordance with local authority requirements.
UK Road Class : 8 Proper Shipping Name: Sodium Hydroxide, Solid.
UN No Road: 1823 UK Road Pack GR: II
ADR Class no: 8 ADR Class: 8 Corrosive substances
ADR Pack Group: II Hazard no: (ADR): 80
ADR Label no: 8 Hazchem Code: 2W
CEFIC TEC(R) No: 80GC6-II+III RID Class no: 8
RID Pack group: II UN No Sea: 1823
IMDG Class: 8 IMDG Pack GR: II
EMS: F-A, S-B Marine Pollutant: No
UN No Air: 1823 Air Class: 8
Air Pack GR: II
Risk phrases: R35, causes severe burns.
Safety phrases: S26, in case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39: wear suitable gloves and eye/face protection. S45: in case of accident or if you feel unwell, seek medical advice immediately show label where possible.
Guidance notes: CHIP for everyone HSG(108). Workplace exposure limits
We declare that at present all our regisered and commercially available ingredients, extracts, oils, plants and skincare products are derived by traditional plant breeding methods. We do not have any ingredient, extract, oil or skincare product from genetically modified material
To the best of our knowledge, the information contained in the sheet is correct. However, we cannot accept responsibility for any consequences from its use.
Animal Testing Declaration
WE DO NOT TEST ANY OF OUR PRODUCTS ON ANIMALS AND NEVER HAVE, WE PREFER TO RELY ON OUR KNOWLEDGE OF ESSENTIAL OILS, INGREDIENTS, PLANTS, FLOWERS AND ESTABLISHED TECHNICAL INFORMATION AND PROFESSIONALS TO ENSURE EFFECTIVE AND SAFE PRODUCTS.
We believe there is already a “safe” and known group of product ingredients used in the cosmetics industry which leave enough scope to be creative and innovative in product formulation without the need for anymore animal testing on new experimental ingredients.
Our suppliers each also agree to not to carry out animal testing on the products and ingredients we purchase. We have a self-imposed cut-off date of 2006 (this was the date our cosmetic formulations came into being) although in reality our suppliers normally have animal testing dates far in excess of this or have never tested at all.
We do not conduct any form of animal testing.
We do not commission any form of animal testing from a third party.
We operate a fixed cut-off date for animal testing and ingedients, which means we will not use any ingredient that has been tested or retested on animals for cosmetics purposes since January 1, 2006
If we find that a company is involved in animal testing in anyway that purchases from us, then we will cease supply immediately. It is a term and condition that by purchasing from Naturallythinking you will not involve yourself or your company in any form of Animal Testing, any violation of this will be dealt with as per any violation of our terms and condtions