Safety Data Sheet (SDS) dated 15/12/2025

Batch Number: FRAMECPSR

Section 1: Identification of Product and Supplier

Product Name: Cade Essential Oil
Product Number: 5060233381982
Brand: Naturallythinking
Supplier:
UK: Naturallythinking, Unit 2 Mill Lane Trading Estate, Mill Lane, Croydon, CR0 4AA
EU: NTEU Ltd (HE 426545), Nikis 1, Anthoupoli, 2350, Nicosia, Cyprus
Contact Telephone: 020 38563588
Contact Email: support@naturallythinking.eu

Section 2: Hazards IDENTIFICATION

2.1 Classification of the substance or mixture

CLASSIFICATION (EC 1272/2008)

2.2 Label elements According to Regulation (EC) No. 1272/2008 (CLP)

2.2.1 Label elements

Hazard pictogram(s)

HAZARD STATEMENTS

PRECAUTION STATEMENTS

Section 3: Composition and information on Ingredients

Inci: Juniperus oxycedrus (Cade) Rectified Wood Oil
Cas: 90046-02-9
Einecs: 289-969-0

Allergens Standard

Eugenol: 1

Isoeugenol: 1

Section 4: First aid measures

Inhalation: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
Eye exposure: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Skin exposure: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with
water/shower.
Ingestion: IF SWALLOWED: call a POISON CENTER or doctor
Most important symptoms and effects, both acute and delayed
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Suspected of causing genetic defects (exposure route).
Indication of any immediate medical attention and special treatment needed
None expected

Section 5: Fire - Fighting measures

Extinguishing media
Suitable media: Carbon dioxide, Dry chemical, Foam.
Special hazards arising from the substance or mixture
In case of fire, may be liberated: Carbon monoxide, Unidentified organic compounds.
Advice for fire fighters:
In case of insufficient ventilation, wear suitable respiratory equipment.

Section 6: Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Avoid inhalation. Avoid contact with skin and eyes. See protective measures under Section 7 and 8.
Environmental precautions:
Keep away from drains, surface and ground water, and soil.
Methods and material for containment and cleaning up:
Remove ignition sources. Provide adequate ventilation. Avoid excessive inhalation of vapours. Contain spillage
immediately by use of sand or inert powder. Dispose of according to local regulations.
 

Section 7: Handling and Storage

General Handling Precautions: Handle in accordance with good occupational hygiene and safety practices in a well ventilated area. Avoid direct contact with skin and eyes. Avoid inhaling vapour. Use protective equipment such as gloves and eye goggles to minimise oil to skin contact. Do not eat, drink or smoke while handling working area. Storage Conditions: Store in full, dry, airtight containers away from sources of heat and light. Do not re-use the empty container.

Precautions for safe handling:
Do not eat, drink or smoke when using this product.
Conditions for safe storage, including any incompatibilities:
Store in a well-ventilated place. Keep container tightly closed. Keep cool. Ground/bond container and receiving
equipment. Use explosion-proof electrical, ventilating and lighting equipment. Use only non-sparking tools. Take
precautionary measures against static discharge.
Specific end use(s):
Flavours,Fragrances: Use in accordance with good manufacturing and industrial hygiene practices.

Section 8: Exposure controls and personal protection

Control parameters
Workplace exposure limits: 
Phenol CAS:108-95-2 EC:203-632-7
Description: Long-term exposure limit (8-hour TWA)
(ppm) Value :2
Description: Long-term exposure limit (8-hour TWA)
(mg/m3) Value :7.8
Exposure Controls
Eye / Skin Protection
Wear protective gloves/eye protection/face protection
Respiratory Protection
Ensure adequate and ongoing ventilation is maintained in order to prevent build up of excessive vapour and to ensure
occupational exposure limits are adhered to. If appropriate, and depending on your patterns and volumes of use, the
following engineering controls may be required as additional protective measures: a) Isolate mixing rooms and other
areas where this material is used or openly handled. Maintain these areas under negative air pressure relative to the
rest of the plant. b) Employ the use of Personal protective equipment - an approved, properly fitted respirator with
organic vapour cartridges or canisters and particulate filters. c) Use local exhaust ventilation around open tanks and
other open sources of potential exposures in order to avoid excessive inhalation, including places where this material is
openly weighed or measured. In addition, use general dilution ventilation of the work area to eliminate or reduce
possible worker exposures. d) Use closed systems for transferring and processing this material.
Also refer to Sections 2 and 7.

Section 9: Physical data and chemical properties

Information on basic physical and chemical properties
Physical State/Colour:Amber to dark brown liquid
Odour: Smoky-phenolic
Odour threshold: Not determined
Melting point / freezing point: Not determined
Boiling point or initial boiling point and boiling range: Not determined
Flammability: Not determined
Lower and upper explosion limit: Not determined
Flash point: 97 °C
Auto-ignition temperature: Not determined
Decomposition temperature: Not relevant
pH: Not determined
Kinematic viscosity: Not determined
Solubility: Insoluble in water.
Partition coefficient: n-octanol/water (log value): Not determined
Vapour pressure: Not determined
Density and/or relative density: 0.9800 - 1.0400
Relative vapour density: Not determined
Particle characteristics: Not determined

Section 10: Stability & Reactivity

Reactivity
Presents no significant reactivity hazard, by itself or in contact with water.
Chemical stability
Good stability under normal storage conditions.
Possibility of hazardous reactions
Not expected under normal conditions of use.
Conditions to avoid
Avoid extreme heat., flames and other sources of ignition.
Incompatible materials
Avoid contact with strong acids, alkalis or oxidising agents.
Hazardous decomposition products
Not expected.

Section 11: Toxicological Information

Acute Toxicity: Acute Toxicity - Oral Category 4
Acute Toxicity Oral 979
Acute Toxicity Dermal 3027
Acute Toxicity Inhalation Not Available
Skin corrosion/irritation: Skin Corrosion / Irritation Category 1B
Serious eye damage/irritation: Eye Damage / Irritation Category 1
Respiratory or skin sensitisation: Sensitization - Skin Category 1
Germ cell mutagenicity: Germ Cell Mutagenicity Category 2
Carcinogenicity: Carcinogenicity Category 2
Reproductive toxicity: Based on available data the classification criteria are not met.
STOT-single exposure: Based on available data the classification criteria are not met.
STOT-repeated exposure: Based on available data the classification criteria are not met.
Aspiration hazard: Based on available data the classification criteria are not met.
Information about hazardous ingredients in the mixture
 

Section 12: Ecological information

Toxicity:Harmful to aquatic life with long lasting effects.
Persistence and degradability: Not available
Bioaccumulative potential: Not available
Mobility in soil: Not available
Results of PBT and vPvB assessment:
This substance does not meet the PBT/vPvB criteria of REACH, annex XIII.
Endocrine disrupting properties: Not Applicable
Other adverse effects: Not available

Section 13: Disposal considerations

Waste treatment methods:
Dispose of in accordance with local regulations. Avoid disposing into drainage systems and into the environment. Empty
containers should be taken to an approved waste handling site for recycling or disposal.

Section 14: Transport information

	UN number:	UN Proper Shipping Name:	Transport hazard class (es):	Sub Risk:	Packing Group:
UN Model Regulations	UN1760	CORROSIVE LIQUID, N.O.S. (p-Cresol, Phenol)	8	-	II
IMDG	UN1760	CORROSIVE LIQUID, N.O.S. (p-Cresol, Phenol)	8	-	II
ADR,RID,ADN	UN1760	CORROSIVE LIQUID, N.O.S. (p-Cresol, Phenol)	8	-	II
ICAO TI	UN1760	CORROSIVE LIQUID, N.O.S. (p-Cresol, Phenol)	8	-	II

Environmental hazards: Not environmentally hazardous for transport
Special precautions for user: None additional
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: Not applicable

Section 15: Regulatory information

Safety, health and environmental regulations/legislation specific for the substance or mixture
None additional
Chemical Safety Assessment
A Chemical Safety Assessment has not been carried out for this product.

Section 16: Other information

Cosmetics directive 7th amendment: Restrictions may apply. 
Check maximum usage levels for skincare.
Concentration % Limits:
SCI 1=35.71% SCI 1B=35.71% SCI 1C=35.71% SCI 2=6.62% EDI 1=17.
65% EDI 2=5.65% SS 1=10.00% MUT 2=33.33% EH C3=96.15% EDI
2A=5.65%
Total Fractional Values:
SCI 1=2.80 SCI 1B=2.80 SCI 1C=2.80 SCI 2=15.12 EDI 1=5.67 EDI 2=17.
70 SS 1=10.00 MUT 2=3.00 EH C3=1.04 EDI 2A=17.70

GMO Declaration

We declare that at present all our regisered and commercially available ingredients, extracts, oils, plants and skincare products are derived by traditional plant breeding methods. We do not have any ingredient, extract, oil or skincare product from genetically modified material

To the best of our knowledge, the information contained in the sheet is correct. However, we cannot accept responsibility for any consequences from its use.

Animal Testing Declaration

UK: As set out under the conditions in Schedule 34 - Amendment of Regulation (EC) No 1223/2009 and related amendments of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 neither the cosmetic nor its component product has been tested on animal purposes

EU:As set out in under the conditions in 1223/2009. Art. 15 Nar. Parliament and the Council of the EU 952/2013 neither the cosmetic nor its component product has been tested on animal purposes

WE DO NOT TEST ANY OF OUR PRODUCTS ON ANIMALS AND NEVER HAVE, WE PREFER TO RELY ON OUR KNOWLEDGE OF ESSENTIAL OILS, INGREDIENTS, PLANTS, FLOWERS AND ESTABLISHED TECHNICAL INFORMATION AND PROFESSIONALS TO ENSURE EFFECTIVE AND SAFE PRODUCTS.

We believe there is already a “safe” and known group of product ingredients used in the cosmetics industry which leave enough scope to be creative and innovative in product formulation without the need for anymore animal testing on new experimental ingredients.

Our suppliers each also agree to not to carry out animal testing on the products and ingredients we purchase. We have a self-imposed cut-off date of 2006 (this was the date our cosmetic formulations came into being) although in reality our suppliers normally have animal testing dates far in excess of this or have never tested at all.

We do not conduct any form of animal testing.

We do not commission any form of animal testing from a third party.

We operate a fixed cut-off date for animal testing and ingedients, which means we will not use any ingredient that has been tested or retested on animals for cosmetics purposes since January 1, 2006

If we find that a company is involved in animal testing in anyway that purchases from us, then we will cease supply immediately. It is a term and condition that by purchasing from Naturallythinking you will not involve yourself or your company in any form of Animal Testing, any violation of this will be dealt with as per any violation of our terms and condtions