Batch Number: FRAMECPSR
Product Name: Tea Tree Essential Oil
Product Number: 5060233382705
Brand: Naturallythinking
Supplier:
UK:
Naturallythinking, Unit 2 Mill Lane Trading Estate, Mill Lane, Croydon, CR0 4AA
EU: NTEU Ltd (HE 426545), Nikis 1, Anthoupoli, 2350, Nicosia, Cyprus
Contact Telephone: 020 38563588
Contact Email: support@naturallythinking.eu
2.1 Classification of the substance or mixture
CLASSIFICATION (EC 1272/2008)
2.2 Label elements According to Regulation (EC) No. 1272/2008 (CLP)
2.2.1 Label elements
GHS Product Identifier: Tea Tree Essential OilHazard pictogram(s)
HAZARD STATEMENTS
Flam. Liq. 3 - H226
PRECAUTION STATEMENTS
Inci: Melaleuca alternifolia (Tea Tree) Leaf Oil
Cas: 85085-48-9/8022-72-8/68647-73-4
Einecs: 285-377-1
d-limonene: 2.5
4-Carvomenthenol 42.00%
p-Mentha-1,4-diene 23.00%
p-Mentha-1,3-diene 12.00%
Eucalyptol 5.00%
Terpinolene 4.50%
alpha-Terpineol 4.50%
p-Cymene 4.00%
alpha-Pinene 3.50%
beta-Pinene 2.00%
Inhalation: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
Eye exposure: Flush immediately with water for at least 15 minutes. Contact physician if symptoms persist.
Skin exposure: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with
water/shower.
Ingestion: Not to be consumed in any circumstances. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
Most important symptoms and effects, both acute and delayed
Harmful if swallowed.
May be fatal if swallowed and enters airways.
Causes skin irritation.
Harmful if inhaled.
Indication of any immediate medical attention and special treatment needed
None expected
Extinguishing media
Suitable media: Carbon dioxide, Dry chemical, Foam.
Special hazards arising from the substance or mixture
In case of fire, may be liberated: Carbon monoxide, Unidentified organic compounds.
Advice for fire fighters:
In case of insufficient ventilation, wear suitable respiratory equipment.
Personal precautions, protective equipment and emergency procedures:
Avoid inhalation. Avoid contact with skin and eyes. See protective measures under Section 7 and 8.
Environmental precautions:
Keep away from drains, surface and ground water, and soil.
Methods and material for containment and cleaning up:
Remove ignition sources. Provide adequate ventilation. Avoid excessive inhalation of vapours. Contain spillage
immediately by use of sand or inert powder. Dispose of according to local regulations.b
General Handling Precautions: Handle in accordance with good occupational hygiene and safety practices in a well ventilated area. Avoid direct contact with skin and eyes. Avoid inhaling vapour. Use protective equipment such as gloves and eye goggles to minimise oil to skin contact. Do not eat, drink or smoke while handling working area. Storage Conditions: Store in full, dry, airtight containers away from sources of heat and light. Do not re-use the empty container.
Precautions for safe handling:
Do not eat, drink or smoke when using this product.
Conditions for safe storage, including any incompatibilities:
Store in a well-ventilated place. Keep container tightly closed. Keep cool. Ground/bond container and receiving
equipment. Use explosion-proof electrical, ventilating and lighting equipment. Use only non-sparking tools. Take
precautionary measures against static discharge.
Specific end use(s):
Flavours,Fragrances: Use in accordance with good manufacturing and industrial hygiene practices.
Control parameters
Workplace exposure limits: Not Applicable
Exposure Controls
Eye / Skin Protection
Wear protective gloves/eye protection/face protection
Respiratory Protection
Ensure adequate and ongoing ventilation is maintained in order to prevent build up of excessive vapour and to ensure
occupational exposure limits are adhered to. If appropriate, and depending on your patterns and volumes of use, the
following engineering controls may be required as additional protective measures: a) Isolate mixing rooms and other
areas where this material is used or openly handled. Maintain these areas under negative air pressure relative to the
rest of the plant. b) Employ the use of Personal protective equipment - an approved, properly fitted respirator with
organic vapour cartridges or canisters and particulate filters. c) Use local exhaust ventilation around open tanks and other open sources of potential exposures in order to avoid excessive inhalation, including places where this material is openly weighed or measured. In addition, use general dilution ventilation of the work area to eliminate or reduce
possible worker exposures. d) Use closed systems for transferring and processing this material.
Information on basic physical and chemical properties
Physical State/Colour: Almost water-white to pale yellow liquid
Odour: Fresh earthy terpenic
Odour threshold: Not determined
Melting point / freezing point: Not determined
Boiling point or initial boiling point and boiling range: Not determined
Flammability: Not determined
Lower and upper explosion limit: Not determined
Flash point: 56 °C
Auto-ignition temperature: Not determined
Decomposition temperature: Not relevant
pH: Not determined
Kinematic viscosity: Not determined
Solubility: Insoluble in water.
Partition coefficient: n-octanol/water (log value): Not determined
Vapour pressure: Not determined
Density and/or relative density:0.8880 - 0.9080
Relative vapour density: Not determined
Particle characteristics: Not determined
Reactivity
Presents no significant reactivity hazard, by itself or in contact with water.
Chemical stability
Good stability under normal storage conditions.
Possibility of hazardous reactions
Not expected under normal conditions of use.
Conditions to avoid
Avoid extreme heat., flames and other sources of ignition.
Incompatible materials
Avoid contact with strong acids, alkalis or oxidising agents.
Hazardous decomposition productsNot expected.
Acute Toxicity: Acute Toxicity - Oral Category 4 Acute Toxicity - Inhalation Category 4
Acute Toxicity Oral 1900 mg/kg
Acute Toxicity Dermal >5000
Acute Toxicity Inhalation Not Available
Skin corrosion/irritation: Skin Corrosion / Irritation Category 2
Serious eye damage/irritation: Based on available data the classification criteria are not met.
Respiratory or skin sensitisation: Based on available data the classification criteria are not met.
Germ cell mutagenicity: Based on available data the classification criteria are not met.
Carcinogenicity:Based on available data the classification criteria are not met.
Reproductive toxicity: Based on available data the classification criteria are not met.
STOT-single exposure: Based on available data the classification criteria are not met.
STOT-repeated exposure: Based on available data the classification criteria are not met.
Aspiration hazard: Aspiration Hazard Category 1
Information about hazardous ingredients in the mixture
| Component | CAS | EC | LD50/ATE Oral (mg/kg) |
LD50/ATE Dermal (mg/kg) |
LC50/ATE Inhalation |
LC50 Route |
| 4-Carvomenthenol | 562-74-3 | 209-235-5 | 1300 | 2500 | N/A | N/A |
| alpha-Pinene | 80-56-8 | 201-291-9 | 500 | N/A | N/A | N/A |
| p-Mentha-1,3-diene | 99-86-5 | 202-795-1 | 1680 | N/A | N/A | N/A |
Toxicity: Toxic to aquatic life with long lasting effects.
Persistence and degradability: Not available
Bioaccumulative potential: Not available
Mobility in soil: Not available
Results of PBT and vPvB assessment:
This substance does not meet the PBT/vPvB criteria of REACH, annex XIII.
Endocrine disrupting properties: Not Applicable
Other adverse effects: Not available
Waste treatment methods:
Dispose of in accordance with local regulations. Avoid disposing into drainage systems and into the environment. Empty
containers should be taken to an approved waste handling site for recycling or disposal.
| UN number: |
UN Proper Shipping Name: | Transport hazard class (es): |
Sub Risk: | acking Group: |
|
| UN Model Regulations |
UN1197 | -EXTRACTS, LIQUID | -3 | - | -III |
| IMDG | UN1197 | -EXTRACTS, LIQUID (Terpinolene) MARINE POLLUTANT |
-3 | - | -III |
| ADR,RID,ADN | UN1197 | -EXTRACTS, LIQUID | -3 | - | -III |
| ICAO TI | UN1197 | -EXTRACTS, LIQUID | -3 | - | -III |
Environmental hazards: This is classified as an environmentally hazardous substance under the UN
Model Regulations. This is classified as a Marine Pollutant under the IMDG Code.
Special precautions for user: None additional
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: Not applicable
Safety, health and environmental regulations/legislation specific for the substance or mixture
None additional
Chemical Safety Assessment
A Chemical Safety Assessment has not been carried out for this product.
Concentration % Limits: SCI 2=18.35% EDI 2=21.51% SS 1=20.00% REP 2=13.04% AH 1=19.42%
EH C2=17.73% EH C3=1.77% EH C4=87.72% EDI 2A=21.51%
Total Fractional Values: SCI 2=5.45 EDI 2=4.65 SS 1=5.00 REP 2=7.67 AH 1=5.15 EH C2=5.64
EH C3=56.40 EH C4=1.14 EDI 2A=4.65
GMO Declaration
We declare that at present all our regisered and commercially available ingredients, extracts, oils, plants and skincare products are derived by traditional plant breeding methods. We do not have any ingredient, extract, oil or skincare product from genetically modified material
To the best of our knowledge, the information contained in the sheet is correct. However, we cannot accept responsibility for any consequences from its use.
Animal Testing Declaration
UK: As set out under the conditions in Schedule 34 - Amendment of Regulation (EC) No 1223/2009 and related amendments of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 neither the cosmetic nor its component product has been tested on animal purposes
EU:As set out in under the conditions in 1223/2009. Art. 15 Nar. Parliament and the Council of the EU 952/2013 neither the cosmetic nor its component product has been tested on animal purposes
WE DO NOT TEST ANY OF OUR PRODUCTS ON ANIMALS AND NEVER HAVE, WE PREFER TO RELY ON OUR KNOWLEDGE OF ESSENTIAL OILS, INGREDIENTS, PLANTS, FLOWERS AND ESTABLISHED TECHNICAL INFORMATION AND PROFESSIONALS TO ENSURE EFFECTIVE AND SAFE PRODUCTS.
We believe there is already a “safe” and known group of product ingredients used in the cosmetics industry which leave enough scope to be creative and innovative in product formulation without the need for anymore animal testing on new experimental ingredients.
Our suppliers each also agree to not to carry out animal testing on the products and ingredients we purchase. We have a self-imposed cut-off date of 2006 (this was the date our cosmetic formulations came into being) although in reality our suppliers normally have animal testing dates far in excess of this or have never tested at all.
We do not conduct any form of animal testing.
We do not commission any form of animal testing from a third party.
We operate a fixed cut-off date for animal testing and ingedients, which means we will not use any ingredient that has been tested or retested on animals for cosmetics purposes since January 1, 2006
If we find that a company is involved in animal testing in anyway that purchases from us, then we will cease supply immediately. It is a term and condition that by purchasing from Naturallythinking you will not involve yourself or your company in any form of Animal Testing, any violation of this will be dealt with as per any violation of our terms and condtions