Batch Number: FRAMECPSR
Product Name: Behenyl alcohol
Product Number: 5060330639573
Brand: Naturallythinking
Supplier:
UK:
Naturallythinking, Unit 2 Mill Lane Trading Estate, Mill Lane, Croydon, CR0 4AA
EU: NTEU Ltd (HE 426545), Nikis 1, Anthoupoli, 2350, Nicosia, Cyprus
Contact Telephone: 020 38563588
Contact Email: support@naturallythinking.eu
2.1 Classifcation of the substance or mixture
2.1.1. Classifcation according to Regulation (EU) 1272/2008
CLP Classification: This substance is classified as not hazardous according to regulation (EC) No. 1272/2008 (CLP)
Not classified
2.1.2. Classification according to EU Directives 67/548/EEC or 1999/45/EC
Classification: This substance is classified as not hazardous according to 67/548/EEC.
Not Classified
2.2 Label Elements
2.2.1. Labelling according to Regulation (EU) 1272/2008
Not applicable.
2.2.2. Labelling according to Directives (67/548 - 1999/45)
Not relevant
2.3. Other hazards
Other hazards : This substance does not meet the PBT/vPvB criteria of REACH, annex XIII.
Inci: Behenyl alcohol
Cas: 661-19-8
Einecs: 211-546-6
3.1 Substances
| Substance Name | Product Identifier | % | Classification according Directive 67/548/EEC |
| 1-Docosanol 661-19-8 >95 | 661-19-8 | >95 | Not classified |
| Substance Name | Product Identifier | % | Classification according to Regulation (EC) No. 1272/2008 [CLP] |
| 1-Docosanol 661-19-8 >95 | 661-19-8 | >95 | Not classified |
Full text of R- and H- phrases see section 16
3.2 Mixtures
N/A
4.1. Description of first aid measures
Inhalation : Remove person to fresh air and keep comfortable for breathing. When in doubt or if symptoms are observed, get medical advice.
Skin contact : Take off contaminated clothing. Gently wash with plenty of soap and water. When in doubt or if symptoms are observed, get medical advice.
Eye contact : Rinse immediately carefully and thoroughly with eye-bath or water. When in doubt or if symptoms are observed, get medical advice.
In case of ingestion : Rinse mouth thoroughly with water. Get medical advice/attention.
Additional advice : First aider: Pay attention to self-protection! Personal protection equipment: see section 8 Never give anything by mouth to an unconscious person or a person with cramps. When in doubt or if symptoms are observed, get medical advice. Show this safety data sheet to the doctor in attendance. Treat symptomatically.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation : No adverse effects are expected.
Skin contact : No adverse effects are expected.
Eye contact : No adverse effects are expected.
Ingestion : No adverse effects are expected.
4.3. Indication of any immediate medical attention and special treatment needed
No data available
5.1. Extinguishing media
Suitable extinguishing media : Water spray, alcohol resistant foam, Dry extinguishing powder, Carbon dioxide
Extinguishing media which must not be used for safety reasons : Strong water jet
5.2. Special hazards arising from the substance or mixture
Fire hazard : Combustible
Specific hazards : Heating causes rise in pressure with risk of bursting. Hazardous combustion products: Carbon oxides
5.3. Advice for firefighters
Advice for firefighters : Special protective equipment for firefighters. In case of fire: Wear self-contained breathing apparatus. Use water spray jet to protect personnel and to cool endangered containers. Do not allow run-off from fire-fighting to enter drains or water courses. Dispose according to legislation. Evacuate area.
6.1. Personal precautions, protective equipment and emergency procedures
For non-emergency personnel : Evacuate area. Stay upwind/keep distance from source. Provide adequate ventilation. Use personal protective equipment as required. Personal protection equipment: see section 8 Do not breathe vapour/spray. Avoid contact with skin, eyes and clothes.
For emergency responders : Ensure procedures and training for emergency decontamination and disposal are in place. Personal protection equipment: see section 8.
6.2. Environmental precautions
Environmental precautions : Do not allow to enter into ground-water, surface water or drains. If the product contaminates rivers and lakes or drains inform respective authorities.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up : Stop leak if safe to do so. Dam up. Clean-up methods - small spillage: Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)., Collect in closed and suitable containers for disposal. Clean-up methods - large spillage: Large spills should be collected mechanically (remove by pumping) for disposal., Collect in closed and suitable containers for disposal. Use foam on spills to minimise vapours. Site should have a spill plan to ensure that adequate safeguards are in place to minimize the impact of episodic releases. Dispose of waste product or used containers according to local regulations.
6.4. Reference to other sections
Personal protection equipment: see section 8 Disposal: see section 13.
7.1. Precautions for safe handling Handling :
Provide adequate ventilation. Use personal protective equipment as required. Personal protection equipment: see section 8 Do not breathe vapour/spray. Avoid contact with skin, eyes and clothes. Take any precaution to avoid mixing with incompatible materials. See also section 10 Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Do not allow contact with soil, surface or ground water.
Advices on general occupational hygiene :
Keep good industrial hygiene. Wash hands before breaks and immediately after using the product. When using do not eat, drink or smoke. Keep away from food, drink and animal feedingstuffs. Keep work clothes separately. Take off contaminated clothing. Wash contaminated clothing before reuse.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep in a dry, cool and well-ventilated place. Do not store near or with any of the incompatible materials listed in section 10. Bund storage facilities to prevent soil and water pollution in the event of spillage. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Packaging materials : Keep/Store only in original container.
7.3 Specific end use(s)
No data available.
8.1. Control parameters
Exposure limit values : No data available
8.2. Exposure controls
Personal protection equipment : The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection : In case of insufficient ventilation, wear suitable respiratory equipment. Half-face mask (EN 140) Full face mask (EN 136) Filter type: A / P The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. (EN 137)
Hand protection : Wear chemically resistant gloves (tested to EN374) ,The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.
Eye protection : Use suitable eye protection. (EN166)
Body protection : Wear suitable protective clothing.
Thermal hazard protection : Not required under normal use. Use dedicated equipment.
Engineering control measures : Provide adequate ventilation. Organisational measures to prevent/limit releases, dispersion and exposure Safe handling: see section 7 . Take precautionary measures against static discharges. Ensure that the equipment is adequately grounded.
Environmental exposure controls : Do not allow contact with soil, surface or ground water. Comply with applicable Community environmental protection legislation.
Physical State: Pellets / Flakes
Appearance White
Odor No information available
Odor Threshold No information available
pH No information available
Melting Point/Range 68 - 72 °C / 154.4 - 161.6 °F
Boiling Point/Range No information available
Flash Point 227 °C / 440.6 °F
Evaporation Rate Not applicable
Flammability (solid,gas) No information available
Flammability or explosive limits
Upper No data available
Lower No data available
Vapor Pressure No information available
Vapor Density Not applicable
Specific Gravity No information available
Solubility Insoluble in water
Partition coefficient; n-octanol/water No data available
Autoignition Temperature No information available
Decomposition Temperature No information available
Viscosity 7.5 mPa.s @ 80°C
Molecular Formula C22 H46 O
Molecular Weight 326.61
Reactive Hazard
None known, based on information available
Stability
Stable under normal conditions.
Conditions to AvoidIncompatible products.
Incompatible Materials Strong oxidizing agents
Hazardous Decomposition Products Carbon monoxide (CO), Carbon dioxide (CO2)
Hazardous Polymerization No information available.
Hazardous Reactions None under normal processing.
Acute Toxicity
Product Information
Component Information
| Component | LD50 Oral | LD50 Dermal | LC50 Inhlanation |
| 1-Docosanol | LD50 > 10000 mg/kg (Rat) | Not listed | Lot listed |
Toxicologically Synergistic Products
No information available
Delayed and immediate effects as well as chronic effects from short and long term exposure
Irritation: No information available
Sensitisation: No information available
Carcinogenicty
The table below indicates whether each agency has listed any ingredient as a carinongent
| Component | CAS-No | IARC | NTP | ACGIH | OSHA | Mexico |
| 1-Docosanol | 661-19-18 | Not listed | Not listed | Not listed | Not listed | Not listed |
Mutagenic effects
No information available
Reporductive Effects
No information available
Teratogenicity
No information available
STOT - single exposure: None known
STOT - repeated exposure: None known
Aspiration hazard: No infromation available
Symtoms / effects, both acute and delayed: No information available
Endocrine Disruptor information: No information available
Other Adverse effects: The toxicological properties have not been fully investigated.
Persistence and Degradability
May persist
Bioaccumulation/ Accumulation
No information available.
Mobility
Is not likely mobile in the environment due its low water solubility
| Component | Iog Pow |
| 1-Docosanol | 8.3 |
Waste Disposal Methods
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Chemical waste generators must also consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification.
DOT: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG / IMO: Not regulated
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1. EU-Regulations
Restrictions on use :Not applicable
This product contains an ingredient according to the candidate list of Annex XIV of the REACH Regulation 1907/2006/EC. : none
Authorisations : Not applicable
15.1.2. National regulations
DE : WGK : 1
15.2. Chemical safety assessment Chemical Safety Assessment :
For this substance a chemical safety assessment has been carried out
GMO Declaration
We declare that at present all our regisered and commercially available ingredients, extracts, oils, plants and skincare products are derived by traditional plant breeding methods. We do not have any ingredient, extract, oil or skincare product from genetically modified material
To the best of our knowledge, the information contained in the sheet is correct. However, we cannot accept responsibility for any consequences from its use.
Animal Testing Declaration
UK: As set out under the conditions in Schedule 34 - Amendment of Regulation (EC) No 1223/2009 and related amendments of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 neither the cosmetic nor its component product has been tested on animal purposes
EU:As set out in under the conditions in 1223/2009. Art. 15 Nar. Parliament and the Council of the EU 952/2013 neither the cosmetic nor its component product has been tested on animal purposes
WE DO NOT TEST ANY OF OUR PRODUCTS ON ANIMALS AND NEVER HAVE, WE PREFER TO RELY ON OUR KNOWLEDGE OF ESSENTIAL OILS, INGREDIENTS, PLANTS, FLOWERS AND ESTABLISHED TECHNICAL INFORMATION AND PROFESSIONALS TO ENSURE EFFECTIVE AND SAFE PRODUCTS.
We believe there is already a “safe” and known group of product ingredients used in the cosmetics industry which leave enough scope to be creative and innovative in product formulation without the need for anymore animal testing on new experimental ingredients.
Our suppliers each also agree to not to carry out animal testing on the products and ingredients we purchase. We have a self-imposed cut-off date of 2006 (this was the date our cosmetic formulations came into being) although in reality our suppliers normally have animal testing dates far in excess of this or have never tested at all.
We do not conduct any form of animal testing.
We do not commission any form of animal testing from a third party.
We operate a fixed cut-off date for animal testing and ingedients, which means we will not use any ingredient that has been tested or retested on animals for cosmetics purposes since January 1, 2006
If we find that a company is involved in animal testing in anyway that purchases from us, then we will cease supply immediately. It is a term and condition that by purchasing from Naturallythinking you will not involve yourself or your company in any form of Animal Testing, any violation of this will be dealt with as per any violation of our terms and condtions